Reference illustration: light wood Christmas ornaments laser-cut and engraved, a lighthouse, a northern gannet, an open-work snowflake and round discs, hanging on linen string from a spruce branch in front of a window onto the sea
Christmas ornaments

Engraved wooden Christmas ornaments: names, years and Gaspé motifs

A wooden ball engraved with a first name and a year, a laser-cut lighthouse, a set for the whole family. These ornaments are made to order at our workshop in Saint-Siméon-de-Bonaventure.

Reference illustration: close-up of a light maple disc engraved with a lighthouse on a rocky point and a few waves, with linen string, resting on an off-white cloth beside spruce sprigs
Reference illustration: laser-engraved wooden Christmas ornaments hanging on a spruce branch.

Yes. The workshop can make wooden Christmas ornaments, laser-cut and engraved with a name, a year or a motif from the Gaspé. Most personalized wooden Christmas balls are flat discs: light, with a small hole for the string.

This post covers what can be engraved, which Gaspé motifs work, how to order a set for a family, a classroom or a business, and which wood to pick. Every request is reviewed on the first call, when we confirm whether it can be done and when.

What can be engraved on a wooden Christmas ornament?

The workshop's 80 W CO2 laser works on a 36 x 18 in (915 x 458 mm) bed, so many small ornaments fit on a single sheet. You can have engraved:

  • a first name, with or without the year of the Christmas;
  • a family name, for one ornament shared by the whole household;
  • initials, more discreet, for a set to hang on the tree;
  • a short dedication on the back, such as a place and a date.

For any text, send us the exact wording in writing. We check every name before the machine starts, because an engraving cannot be erased. As of November 2026, our laser engraving service covers wood, slate, glass, leather and acrylic.

Ornament shapes and what you can personalize
ShapeProcessMaterialWhat you can personalize
Round disc (flat ball)Laser cutting and engravingPlywood or thin hardwoodFirst name, year, motif
Star or open-work snowflakeLaser cuttingThin plywoodShape of the motif, initials
Lighthouse or boat silhouetteLaser cutting and engravingPlywood or thin hardwoodEngraved details, year
Northern gannet or spruceLaser cutting and engravingPlywood or thin hardwoodMotif, first name on the back
Hanging tagLaser engravingThin hardwoodName, short message
Carved medallionCNC machining and laser engravingHardwoodRelief, name, year

Every ornament is made to order. Whether it can be done, and when, is confirmed on the first call.

Which Gaspé motifs cut and engrave well?

A regional motif is recognized by its outline. The laser cuts a clean contour and engraves the detail inside it. These are motifs the workshop can make to order:

  • a lighthouse from the coast, with its gallery and lantern engraved;
  • a northern gannet, the bird of Bonaventure Island and Percé Rock;
  • a spruce or a fir, alone or as a small engraved forest;
  • the outline of Percé Rock or of the Baie-des-Chaleurs;
  • a sailboat or a fishing boat, to suit your village.

The workshop has already carved a northern gannet in relief on the CNC. A laser-cut ornament takes the same outline flat and lighter. A motif that does not exist yet is drawn from your picture or your idea. That is a custom project, reviewed before it is accepted.

Reference illustration: close-up of a light maple disc engraved with a lighthouse on a rocky point and a few waves, with linen string, resting on an off-white cloth beside spruce sprigs
Reference illustration: a round maple ornament engraved with a lighthouse, with its linen string.

A set for a family, a classroom or a business

The laser has one advantage for sets: the file is prepared once, then engraved on one piece or twenty. Each ornament can carry a different name while the drawing stays the same.

  • Family: one ornament per person, with the first name and the year, to hang every Christmas.
  • Classroom or group: one motif, one first name per student or participant.
  • Business: a logo and a year, for year-end gifts to staff or clients.
  • Collection: one ornament a year, same shape and a new date, to start a family tradition.

Quantity and schedule are discussed on the first call, depending on the work already in the shop. For business sets, our post on engraved corporate gifts describes the process.

Thin plywood or hardwood: which material for an ornament?

Plywood is made of thin sheets of wood glued together, each sheet laid at a right angle to the one below. That cross-graining reduces splitting and warping, which suits flat, open-work pieces. Hardwood shows its natural grain.

  • Thin birch plywood: light, stable, well suited to open-work motifs and fine detail. The laser-cut edge turns brown.
  • Thin hardwood, such as maple or cherry: you see the colour and grain of the species, and each piece differs a little from the next.
  • A narrow part of an open-work motif breaks more easily in hardwood, along the grain. The workshop adjusts the drawing to allow for it.

Both engrave well, but the result varies from one species to another: some engravings come out darker, others softer. Which panel or species is in the shop is confirmed on the first call, before you order. Ornaments stay thin and flat so they sit on a branch without bending it.

What finish helps a wooden ornament last?

An ornament comes off the tree, then goes into a box until next Christmas. The finish protects the wood from handling and humidity. On hardwood, the finish is applied by hand, with oil: the wood keeps its natural colour. The choice of finish is confirmed on the first call.

  • Oil on hardwood brings out the grain and can be refreshed when needed.
  • The hole for the string or ribbon is placed in the drawing, where you want it.
  • For storage, tissue paper or a rigid box, kept somewhere dry.

Do not leave ornaments next to a direct heat source or in a damp basement. A dry cloth is enough to dust them.

How to order engraved Christmas ornaments

An ornament order follows four short steps.

  • Describe the piece by phone or email: the shape, the motif, the texts, the quantity.
  • The workshop confirms whether the piece can be made and what its schedule allows.
  • You receive a quote. Nothing starts before you approve it.
  • Pick the ornaments up at the workshop in Saint-Siméon-de-Bonaventure, or have them delivered within the Baie-des-Chaleurs. Elsewhere in the Gaspé, delivery is on request, case by case.

These ornaments are small, light pieces. For other wooden gift ideas, from board games to epoxy pieces, read our wooden Christmas gift ideas.

The holiday season is often busy at the workshop. The earlier the request arrives, the more room there is in the schedule, and we tell you plainly on the first call.

Plywood is made of thin glued sheets, the grain of each sheet crossed with the next, according to the Wikipedia article Plywood.

An ornament to have engraved?

Tell us the shape, the motif and the texts. In business since 1994, the workshop tells you plainly what can be made, and when. Phone: 418-534-4167.

Frequently asked questions

Can you engrave a name and a year on a wooden Christmas ball?

Yes, the laser engraves wood. Send us the exact text in writing and we check it before engraving. A personalized ball is most often a flat disc. A round, assembled three-dimensional ball is a different project, to discuss on the first call.

Can I order a single ornament, or only sets?

The workshop can make one piece or a set, to order. The file is prepared once, then engraved as many times as needed. Quantity and schedule are confirmed on the first call.

Which wood should I choose for a Christmas ornament?

Thin plywood suits open-work motifs and fine detail. Thin hardwood, such as maple or cherry, shows its natural grain. Tell us the motif and we confirm the available material and the result before you order.

Can I get a Gaspé motif, like a lighthouse or a gannet?

Yes, to order. The laser cuts the outline and engraves the detail. If the motif does not exist yet, the workshop draws it from your picture, and whether it can be done is confirmed on the first call.

Will the ornaments last from one Christmas to the next?

Hardwood is finished by hand with oil. Stored dry in tissue paper or a rigid box, it keeps well from year to year. We do not promise a specific lifespan, because it depends on storage and humidity.