
3D printing in the Gaspé: what the workshop offers instead
3D printing builds plastic parts layer by layer. Atelier Multidécor does not offer it as a service. Here is what 3D printing does, what CNC and laser do, and when a wood piece is the right call.

As of November 9, 2026, Atelier Multidécor does not offer 3D printing as a service. The workshop in Saint-Siméon-de-Bonaventure makes pieces in wood and panel stock by CNC machining, laser engraving and cutting, and epoxy resin pours.
If you are searching for a 3D printer or a 3D printing service in the Gaspé, this post helps you decide. It covers what 3D printing does well, what CNC and laser do, and when a wood piece is the right choice: signs, reliefs, plaques, parts that last.
What is 3D printing, and what is it made for?
3D printing is additive manufacturing: a printer lays down material layer by layer from a digital model. It mostly works with plastic, as filament or as liquid resin that is cured. It suits these uses well:
- prototypes and mock-ups, to check a shape before making it in volume;
- small plastic parts: brackets, knobs, clips, replacement pieces;
- hollow shapes or complex interiors that cannot be cut from a solid block;
- figurines and small decorative objects.
Its limits are well known. A part's size depends on the printer bed, layer lines often stay visible, and the material remains plastic. What the workshop makes is listed on the services page, and 3D printing is not on it.
How does it differ from CNC and laser engraving?
3D printing adds material. CNC and laser remove it. Epoxy is poured. The table sums up what each process does and what it is used for.
A desktop 3D printer can make a small plastic part. It cannot make a large wooden sign or a relief in a hardwood board. For those pieces, CNC is the right process.
The processes sometimes combine. A sign can be CNC-machined for its shape, laser-engraved for its fine detail, then hand finished. A river table pairs wood with an epoxy pour. Each combination is checked at the drawing stage, before anything is made.
| Process | How it works | Materials | Suited to |
|---|---|---|---|
| 3D printing (not offered by the workshop) | Adds material layer by layer | Plastics: filament, resin | Prototypes, small parts, hollow shapes |
| CNC machining | Removes material with a router bit | Wood, panels | Signs, reliefs, cabinetry parts |
| Laser engraving and cutting | 80 W CO2 beam, 36 x 18 in (915 x 458 mm) bed | Hardwood, slate, glass, leather, acrylic | Text, patterns, plaques, small objects |
| Epoxy pour | Resin poured in layers, cured between each | Resin and wood | River tables, wall art, trays |
A general overview. Every project is reviewed before it is accepted, and feasibility is confirmed on the first call.

When is a machined or engraved wood piece the better route?
Choose wood when the piece has to be seen, handled or last, and when it is bigger than a printer bed:
- a shop, B&B or cottage sign, machined in wood and engraved;
- an engraved plaque for an address, a tribute or a door;
- a carved relief: a coastal landscape, a pattern, a crest;
- a cabinetry part cut from a panel: shelf, front, drawer bottom;
- a gift engraved with a name or a date, in hardwood or slate.
A wood piece keeps the grain and the feel of the material, and a hand finish protects it. To see what machining gives on large flat parts, read our post on CNC-machined doors and fronts.
In the Baie-des-Chaleurs, a sign faces wind, rain and coastal salt. The material and finish are therefore chosen to suit where the piece will hang. Tell us the exposure on the first call, and the workshop says what will work.
What does the workshop's laser engrave and cut?
The 80 W CO2 laser engraves hardwood, slate, glass, leather and acrylic on a 36 x 18 in (915 x 458 mm) bed. The file is prepared once, then engraved on one piece or several. These are pieces the process makes possible:
- a name, a date or a dedication engraved on a board;
- a logo or a pattern on wood, slate or leather;
- a set of coasters;
- a small-format plaque.
The laser engraving page details the materials and sizes. For a piece larger than the laser bed, CNC takes over.
What if your project truly needs a 3D-printed part?
If the part has to be plastic or printing resin, or has a complex hollow interior, the workshop cannot make it. We tell you so on the first call instead of promising. Two cases can still be handled by CNC or laser:
- the piece can be made in wood or panel stock, flat or in relief;
- you have a 3D model of the shape you want: a file can sometimes serve as the basis for a machined relief or an engraved pattern.
Feasibility is confirmed case by case, depending on shape and material. A relief is seen from one side. A hollow part or one with overhangs cannot be machined from wood the way it is printed, and we tell you whether it is possible.
For a plastic part to be printed, the workshop is not the right contact. For anything that is cut, engraved or poured in wood, it is. Either way, we would rather give you a clear answer from the start.
How do you start a made-to-order project with the workshop?
The workshop's engraved, machined and poured pieces are made-to-order projects. Each request is reviewed before it is accepted:
- Describe the piece: its use, the material you want, the dimensions, the text or pattern.
- The workshop confirms whether CNC, laser or resin can make it.
- You receive a quote. Nothing starts before you approve it.
- Pick the piece up at the workshop in Saint-Siméon-de-Bonaventure, or have it delivered within the Baie-des-Chaleurs. Elsewhere in the Gaspé and in Quebec, delivery is discussed on request, case by case.
Feasibility and timing are confirmed on the first call, based on the work already in the shop.
The definition of 3D printing as additive manufacturing, which deposits material layer by layer, follows the 3D printing article on Wikipedia.
A wood piece to have made?
Tell us the piece, its size and its use. In business since 1994, the workshop tells you plainly what can be made, and when. Phone: 418-534-4167.
Frequently asked questions
Do you offer 3D printing?
No. As of November 9, 2026, Atelier Multidécor does not offer 3D printing as a service. The workshop machines wood and panels on a CNC, engraves and cuts with a laser, and pours epoxy resin pieces. If your project can be done with those processes, tell us on the first call.
What is the difference between a 3D printer and a CNC router?
A 3D printer adds material layer by layer, mostly plastic. A CNC router removes material from a block or panel, such as wood. The first suits prototypes and small plastic parts. The second suits signs, reliefs and cabinetry parts.
Can you engrave or machine from a 3D model?
Sometimes. A 3D file can serve as the basis for a CNC relief or a laser-engraved pattern, when the piece is seen from one side. Send us the file or an image on the first call. We confirm feasibility before any quote.
Which pieces suit CNC or laser better than 3D printing?
Signs, plaques, reliefs, large pieces and objects engraved with a name or a date. Wood and slate give durable pieces with a natural finish. Tell us where the piece will be installed: the workshop confirms the material and the finish.
Do you deliver outside the Baie-des-Chaleurs?
Pieces can be picked up at the workshop in Saint-Siméon-de-Bonaventure or delivered within the Baie-des-Chaleurs. For the rest of the Gaspé and Quebec, delivery is discussed on request, case by case, depending on the piece and its size. Ask when you request a quote.



